Quote:
Originally Posted by 214Chevelle
What are the plans for this truck.....wheel size, motor/tranny combo, suspension, etc?
|
Here is a general lay out on the Goodguys giveaway truck
1.Scotts tube chassis
Tube x-memeber
Body mounts
100% tig welded
Scotts standard ifs
New power rack
Tubular upper and lower a-arms
Cnc machined rodends
Modular dropped C-10 spindal
Ridetech SA coil-overs
Torsion splined bar
Wilwood 14 inch slotted rotors
Wilwood W6A Caliper
Scotts L-s m/m
Scotts tranny mount
Brake lines plumbed s.s
Fuel lines plumbed s.s
Scotts standard 4-bar
Ridetech SA coil-overs
Scotts Watts link
Moser fabricated 9 inch rearend
Wave track 373
33 spline axles
Wilwood 14 inch slotted rotors
Wilwood W4A caliper
Scotts fuel tank with efi pump
Wheels
Billet specialties
Rear 20x12
Front 20x10
Motor
Built L-s 3 motor
TCI automotive tranny
Headers and Exhaust
Custom S.S headers made by Scotts
S.S mandrel bent exhaust by Scotts
Ride height on truck will be 4 1/2 from ground
Overall height on C-10 will be 56 1/2 to the ground
Body mods
Several custom modifications to many to list
There will be a ton of build pics for you all to see
Paint
Palmers customs to lay down one of his stellar jobs
Interior
Ron Mangus to do one of his one off interiors
Our goal hear is to build a truck that you all will remember for years down the road
Completion of this build will be early Spring 2014
Justin