Quote:
Originally Posted by paulk68
so for the guys buying their wheels first, what backspacing are you ordering for your wheels?
|
5.5" to 6" is pretty common backspace and gives a nice deep look on the outside. You need to purchase the wheels you will use first and mock them up in the wheel wells to determine the wheel mount surface to wheel mount surface width of the rear end. The 54.75" mentioned earlier is most likely a housing flange measurement and has nothing to do with the WMS to WMS measurement. Do NOT leave this measurement to someone else you need to determine WMS to WMS for your car.
Read this thread and educate yourself about how to measure rear axle width before you order anything.
https://lateral-g.net/forums/show...&highlight=WMS