Thread: Running 18x9.5 Wheel On A 1968 Camaro
View Single Post
  #3  
Old 11-26-2013, 08:32 PM
Regal454 Regal454 is offline
Member
  
Join Date: Dec 2009
Location: Mooresville, NC
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Not sure about the AFX spindle, but I believe Ridetech recommends an 18x9.5 with 5.5" of back spacing or an 18x10 with 5.75" of back spacing.

The Ridetech spindle does correct the camber curve through its taller design over stock. The relocated steering center link bracket along with the raised steering arms drastically reduce bump steer.
Last edited by Regal454; 11-26-2013 at 08:36 PM.
Reply With Quote