[Firebird-Geek]

With all of the internal braces and panels welded into place, I started to clean up the inner structure for primer and seam sealer. At first it was kind of nice to be out in the shop and working without having to measure something every 5 minutes, BUT, after a few hours of doing this it became a bit tedious taking the structure back down to bare metal in preparation for the epoxy primer. All those nooks and crannies!

During the process of cleaning up the inner structure. I forgot to grab a photo of this area once I was finally done and it was all back to shinny metal. (after 6 hours of cleanup)




Inner structure sprayed with epoxy primer. Something GM didn't even seem to bother priming at all from the factory.