Quote:
Originally Posted by Sonar Chief
My back was fine until this summer's field work ....must have done somethin'? The alignment at the bumper line looks good ... I haven't really messed with the back much, I'll try and get some pictures today. Supposed to be 49 today ... and if I can get the garage to that temp I'll be happy 
A fix I dreamed about .... slice off the lower inch, line it up correctly and weld in a piece of 1 inch 18 ga angle! Or... hammer the flange flat and re bend it were it needs to be .....GRRRRRR!
Thanks! |
Well, I just read your post and I congratulate you for your courage.
As it must have to do all the body work which you attack you, there is not a place where you do not have rust. Really impressive!
For my part - the other side of the Atlantic because I'm French - I also restore a 1st gen 67 RS SS 396. I order my parts from you in the USA (summit, Rick's) and like you I completely disassembled. Luckily, no rust.
I'll really say congratulations on your perseverance and courage.
Et ça c'est juste pour faire la comparaison avec ton travail sur lequel je suis admiratif
