Realize this is an old thread but in my research for a new MIG I came upon it. After reading pronova's post I researched the Eastwood MIG 175 and I believe I have found the welder I'm going to order.
Found this thread from over 3 years ago and was interesting reading how the opinions of the welder changed once a few of the members starting actually using the machine.
http://weldingweb.com/showthread.php...od-Mig-Welders
I realize it isn't a Miller, or HPT...but for a beginning hobbyist welder, it sure seems like a decent entry level setup that will allow one to weld on not only mild steel but aluminum and stainless (think exhaust systems) all with the same unit.
I need to research the plug a bit. Don't think it's a problem but I have a RV style lead and plug on my lift and I'd like to plug my new welder up to that same plug. Should be able to fab up an adapter or just change the plug on the lead of the welder but that might affect the warranty.
Anyway, that's how I'm spending my Christmas morning...welder shopping.
