[INTMD8]

Here's the start of my new intercooler. (I ditched the air/air). Holley high ram base and liquid intercooler core that fits it.

Bent up the end tanks and clamped them to the top flange so I could mark the intake manifold for holes to be drilled.

The holes in the end tanks will have long -8 male fittings welded to them and have an external o-ring to seal inside bungs that will be welded to the intake manifold in the same locations. So, when finished I can drop the intercooler core in the intake manifold, the o-rings will seal boost/vacuum and the 3 -8 fittings per side will be the coolant flow inlets/outlets.