12-30-2013, 01:24 PM
|
 |
Senior Member
|
|
Join Date: Dec 2009
Posts: 5,044
Thanks: 6
Thanked 9 Times in 6 Posts
|
|
Quote:
Originally Posted by hifi875
alpine head units, jl audio amps and speakers. period.
|
Quote:
Originally Posted by canrc
X2 on an Alpine head unit and the JL Audio amp -- the JL Audio HD 900/5 would be great paired with a set of there C5 components but might not be enough for a set of Hertz, Diamond Audio etc... And for the sub for a small sealed enclosure its hard to beat a JL Audio 10W6 or even a 10W3.
If you go with an Alpine head unit get a Alpine Imprint Module (PXA-H100) and mount it in the trunk close to your amps that way you are only running one AiNet cable from the head unit to the module in the trunk and then your RCA's run from the module to the amps (you will have to buy a long AiNet cable as the one with the Imprint Module is not long enough to run to the trunk)
Not only do you have only one wire for the running the length of the car instead of a bunch of RCA's you are able to tune the system from the imprint via microphone. I have a similar setup in mine.
|
Sounds familiar  
|