Quote:
Originally Posted by chr2002ca
Yah, no kidding! The same gauge worked fine with my repop stainless tank and sending unit, but this new sending unit is sending a different signal. I'm going to check the ground wire to see if possibly I moved that when I was re-wiring everything. Like you, I just keep refilling often until I get it sorted out.
|
I've went through two gauges and as many sending units in my Willys and can't get that fricken thing to work. The worst is that sometimes it works and sometimes it doesn't with no rhyme nor reason. I even ran jumper wires to see if the wiring was faulty. I just finally gave up, at least until it's warmer again.
[/hijack]
