So I just looked at your kit and re-read your post. You have 3 blue fittings in your kit, two of them should be 3/8 fittings and one 5/16 fitting. The 5/16 will go onto the smaller line on your filter which will be your return. One of the larger blue fittings will go onto the larger port on the filter which is your inlet, match those up with the inlet and outlet on your pump. The silver one is your outlet fitting, which goes on the side of the filter with one outlet on it. The left over blue fitting which is 3/8 just snaps onto your fuelrail. All of these should be -6 on the end. These fittings are all snap together, very easy to use. I can't get the links to work from summit on the npt to AN so I will just put them here. SUM-220648(3/8 npt to -6) you should need two. Hope this helps you out some
|