Obeer-WAN, The kit that you linked has 3 blue fittings, one of the 3/8 blue ones will just snap onto the fuel rail. You will then need a -6 90 or 45 degree fitting to hook onto that. If you want to run hardline they have AN to hardline adapters but I have never used them so not sure how well they work. Anywhere you use braided line you need to use PTFE because of the fumes. I used braided line all the way just because it was easy for me to have them made at the hose place. When you finish post what you did because I would like to know if you went the hardline route. I'm working on a 71 Chevelle that I think I am going to use the tanks inc setup.
|