View Single Post
  #1  
Old 07-14-2006, 12:05 PM
ArisESQ ArisESQ is offline
Senior Member
 
Join Date: Aug 2005
Location: Los Gatos
Posts: 765
Thanks: 8
Thanked 10 Times in 9 Posts
Default Did a little test fitting last night...

Just thought some of you guys may be interested...

A friend of mine has a set of 18x10 w/ 5.5 inches back, and a set of 295. We were curious if they would fit at all on my car (67 camaro).. and well... to my surprise they did. there was actually about an inch of room between the inner fender and the tire.

all i have done to my fenders is have the lip completely trimmed off, and the fender mildly pulled with a fender rolling tool. an offset of 5.75 to 6 would have probably been ideal, but the 5.5 DID fit without issue.

also, my car is lowered in the rear via hotchkis leafs, and it looked like it could go about 1 to 1.5 inches lower without rubbing.

Last edited by ArisESQ; 07-14-2006 at 12:21 PM.
Reply With Quote