Quote:
Originally Posted by 72Z/28
Well I am not what style it is but it was bolted on to the Speedtech subframe kit when the kit was ordered from them.
As far as the power steering pump, I believe it is the one that comes with LS6 crate engine.
|
The standard LS power steering pump would be a 3 GPM so the restrictor/ flow valve needs to be changed to a 2 GPM Billet Specialities sells them part # RP1300
this "normally" wont cause any issues if it has not been drive much but will make the steering way to light and will increase the heat build up in the fluid as it tries to bypass too much fluid. as well it may cause air in the system and it will be impossible to bleed out.