First I think we need to explain that what you call "low" is not really LOW. . .it's what we all design around. We still have 3" compression travel, which is plenty, even for the street.
To buy tall spindles or not:
You could set your static camber at -1.5
This will get the tire flat when cornering and you have enough roll.
However, you'll wear tires more quickly than if it were set at -0.5
Since this is primarily a street car I would keep static low to save the tires (we don't care as we track our cars so often we wear out the tires before they wear unevenly).
So not you have to keep a low static, but you still want more camber gain to keep the tire flat in roll. This is where you need better geometry. . .hence the tall spindle.
|