No, that will not fly. I would contact Currie and ask them about having the axles redrilled for the new studs. you may be able to drill a second bolt circle 36 deg off of the first (assuming 5 lugs) with the correct hole size for the knurling.
The other option is to replace the m12's on the front with 1/2" you should be able to ream the holes in the front hubs to the proper size for 1/2" studs.
Another concern is the wheels. Make sure you have the correct lug nut tapers. Some are 45 deg, some are 60 deg. and some are straight shank with washers etc. Just make sure everything matches up.
Good Luck.
|