it has been a pretty good info thread, some complaining now and then but, I have tried to gather as much info as I can get, while still performing at work, this morning I grabbed spindles, tape measures, tools and set out to get some measurements that many said they wanted on the frame and mounting surfaces
so spindles first......stock vs. RideTech Drop, as you can see other than the RideTech spindle being taller the build dimensions are the same...
the snouts line up
the bearing surfaces line up
the the ball joint mounting location is the same
so the wheel is not moved out or in from stock spindle locations
next is frame measurements.....hold on