Starting to put things together. I am mocking up where to mount the A/C
compressor. I've seen a number of compressors that will fit the space represented by the coffee (red) plastic container. I am also looking for a power steering pump to put in the center above the crank shaft pulley to act as a pump and an adjuster. I was able to install the alternator quite easily, it didn't fit but was close. I had to cut a small amount off the case of the unit and refit one of the 3 housing bolts. Having done that it fits tight & keeping it low as I can. Trying to keep everything mounted as low as I can on this build as overall CG is paramount to me.
