Quote:
Originally Posted by raustinss
I think I already know the answer but would they work with stock Z06 rotors
Ryan Austin
|
Although not designed with this rotor application in mind, YES it will work. You would slide the one piece rotor over/onto the Billet Hub just like the OEM, then you would be required to put spacers between caliper mounting lug and the C5/6 Upright caliper mounting point (basically spacing the caliper out over the rotor that would be sitting "outward" approx. 3/16"...... these spacers can be purchased at most any ACE hardware/etc. in the form of a extra thick washer. I use the same type setup when mounting Brake Man Calipers to these hubs....