You can look on project updates forums to check out other people's swaps.
Few things to consider:
-Fuel system: looks like to have the tank sorted out. You need to sort out your fuel lines from tank to the fuel rail. If you're planning to track your car at all, Vaporworx tank probably the best bet. Tanks Inc tank will work for most application.
-Motor mouts/adapter plate: some combo work with some headers. Others will locate the headers too low. Holley's new set up (mount/crossmember/headers) looks to be a sweet set up in regards to ground clearance.
-Wiring harness: you can get harness from PSI or Speartech. They need to know what trans you're using so that they can program the ECU accordingly.
-If you're running AC: you'll need to get a bracket to mount the AC compressor. Holley/Dirty Dingo plus others sell the bracket.
Good luck.
|