Quote:
Originally Posted by frankv11
Does any one have a part # for those fiitings. Preferably xrp
|
I don't have part numbers, but DSE sells the fittings on their website. I would just buy them there.
As for the best way to tighten those fittings down, or undo them, should you need to, it is easiest to just unbolt the two main bolts on the rack and slide the rack out a bit. I've had to work on this setup about a dozen times, and the last time was at Optima when I broke a rack. Andy from DSE helped get it all back together and tightened the fittings before bolting the rack in place. It may seem like more work, but it is considerably less frustrating and, I think, faster as well.