Got the wheels and like the full combo. I was nervous of the wheel depth but really like the the more shallow rear rim rather than a huge lip. I also really like the 18/19" combo. I think the sizing looks perfect on the car and would do it again in a heartbeat.
There are 2 issues but they can be addressed
- The tolerance for the rear hub is too tight so the wheels don't fit all the way on.
I'm either going to need to send them back to have the hubs bored out or machine down the hub flanges and add 1/4" spacers. I went concervative on the spacing to allow more clearance with the quarter panels so there is room to space out but it's still a little frustrating.
- With the lower ride height that looks awesome the wheels could have used a little more BS.
I'm going to change the inner fenders one more to allow from more clearance. Think I'm going to cut out the entire edge and rather than try to reshape and weld it I'm going to simply fiberglass the edge.
Time for the pics. I'll try to get better ones in the morning.
