[MX145]

I mocked up the vintage air. The bulkhead and components are nice however there's room for improvement with the brackets and plastic housing.



I made a little bracket to mount the unit and vent on the passenger side. I also welded studs for the v shaped bracket on the top right and bottom left. The v-bracket works for either location so I made another one which really stiffened up the mounting. The main bracket was crooked. I had to slot the holes at a 45 to get the unit to mount level and for the retangular opening to match up to the controller plug. I also welded a couple button head allen's stuck through the cowl to mount the dash support while I was back there.