Quote:
Originally Posted by GregWeld
Yes -- should have been is NOT down....
|
It's the same as it was before the gear and bushing change and it vibrates like a mother at 50-52.
Quote:
Originally Posted by GregWeld
A driveline will feel like it's a rotational vibration -- kind of moving "around" the car...
Tires out of balance feel more like a "bouncing" vibration...
A bent wheel feels like a side to side vibration... or shaking side to side.
What we don't know is what kind of vibration you're feeling???
|
Check......feels centered like the slight vibration that was present but magnified.
Quote:
Originally Posted by GregWeld
I know you've read these instructions/set up on driveshaft angles....
I've seen situation in FIG 7 -- many times.... and hope that you've loaded the rear axle and checked your driveshaft angle. I have a tool for that if you want me to bring it with me???
|
I jacked it up this morning but need taller jack stands to support the rear axle. Need to pick up a kid from school and grab taller jack stands then I'll confirm relations and angles best as possible with my little digital gauge. Then I'll loosen the shackles to snug and recheck angles. We'll see.
