Wilwoods cable kit is "universal". They only have a couple different part numbers or "kits". The one for their internal e-brake is 330-9371. I got mine from Jegs.
If you are looking for something that is a direct bolt-on to your e-brake pedal in the car, this ain't it. (not sure anyone makes such?) These look like they are intended for a between the seats e-brake handle... but I was able to easily adapt mine to work with the factory pedal.
A tip on install,
The cable housing end where it mounts to the backing plate is aluminum. The nut that secures it is aluminum and has a thick nylok washer made into it. On one of mine, apparently the nylok was a little too thick or stiff. When I threaded the nut on, it stopped at the nylok and stripped all the threads off the housing... dead in the water for a week while they replaced the housing.
EDIT** It does look like you might be able to put something together from Lokar using several of their kits that would get you all the way to the pedal...
Jeff-
__________________
You remind me of the timing on a turbo engine...
Last edited by Ketzer; 05-05-2014 at 07:53 AM.
Reason: Added info about Lokar
|