Not my sales thread but thought I might help out. Most of the time those motors run a Tilton 7.25 triple disc clutch. Can find them used and in good shape for $200-$300. Bell housing is for Muncie or Super T-10 style bolt pattern. Most would run a Jerico/Tex 101 style dog ring 4 speed. $1700 to $2800 rebuilt with shifter. I think a TKO 5 speed has the same bolt pattern but doubt it would handle the HP.
Would not use mild and this motor in the same sentence. With 10:1 compression is will still make 675-700 hp at close to 9000 rpm with that short stroke. Bump the compression to 12:1, and as Ron Sutton stated, 850 hp motor.
I was going to put one of these in a 70 Cuda.
|