X3 on the Vaporworx setup. My Ricks is nice, and the other two you mentioned are good as well, but the Vaporworx is great. If i had it to do over again, Vaporworx.
At t-hill last month, i experience two "just" hiccups at turns 12/13/14 at a half a tank, maybe it was 1/4 tank, you wont have that problem with the Vaporworx.
So, i'd recommend the SW headers, i just didn't like the way the Kooks came across the top on the drivers side (iirc). Hopefully Speedtech can come through with the kit. My Dynatechs fit fine, a little low, but fine. The Hooker stuff for the newer 2nd gens has another 1" of ground clearance and dont have the flange in the way.....
But the list looks good. Should be straight forward. I used the Holley mounts (per Keiths recomendation) but i'd use the Wegner or Vintage set up in the future, keeps everything well above(the power steering) the pitman on our
cars.
__________________
Mike
|