Quote:
Originally Posted by cwylie
Just the part numbers and what you used for the brake lines on the rear axle. I need to plumb mine and it would be helpful if you had a list of what you used.
|
For brake lines I'm running 3/16" NiCopp (seamless copper/nickel) lines. They are nice and soft which makes them easy to bend and flair and they seal up good. Also they never rust. I got the line in a 25' foot roll I believe. It came from Jeggs, part #635800
I'm running Stainless Rockguard, Line Clamps and Fittings which I sourced through Inline Tube. Obviously the rockguard length and fitting sizes will depend on your specific application. Check them out @ inlinetube.com or you can call them at 586-532-1338.