As you know - I bought those small race ramps to get the car up on the lift.
Well the oil pan gasket has been leaking on my LS2 - seeping from the bolts - and been covering the bottom of the pan in a mist of oil.
Previously - I took out the bolts that I could reach and put some RTV on the end of the bolt and torqued them back down - this didn't really fix the problem, so I ordered a new oil pan from GM.
The old felpro gasket that I used I had to take the oil pan off 3x when I was building the the motor back in Jan/Feb - I am not sure if taking it off those times screwed up the gasket or what - so this weekend I am going to drop the front suspension, raise the motor up, and replace the gasket. I went with a GM gasket this time - hopefully it seals up!
Those ramps worked exactly as planned and gave me the height that I needed to get under the lowered car:
