Quote:
Originally Posted by DBasher
Need some help on what exactly I need to go from my 2.41 to a 4.10 ratio in the 10 bolt I have. Looking at Randy's R&P site it looks like I need a new carrier for anything bigger than a 3.08....what else is needed?
The axle is out of a 78 Camaro, I still need to check if its 28 or 30 spline and like I said its currently a 2.41 ratio.
Thanks for any input
Dan
|
I believe the 3 and 4 series relates to 12 bolt (8.875) only. 10 bolts have under 2:73 and over 2.73 gears. So just the correct carrier and gear ratio....if its a late 8.5 its 30 spline. If it is 28 then do new axles too and go to 30 spline.