I got a good laugh out of Lance's post about you doing the work.... Obviously he isn't tracking for the last decade. LOL
I was on the chassis dyno and the fitting blew out of the rack... took the threads with it. That's the problem with running a REBUILT rack... and aluminum with steel fittings... and who the hell knows the fit on the threads. Might have been galled when the old fitting was removed and took half the threads with it. I bought a BRAND NEW rack to "fix" the problem.
Funny thing about building these cars.... I've buttoned up motors that I've built personally which includes cutting ring gaps etc - and fired 'em up - set the timing and adjust the carb and drove to Reno and back.... and I've had pro built motors that didn't last the week... and pro built motors that never leaked or did anything but work as they should.... I've had two hot rods pro built now - one was a complete hassle and the other was a complete joy. Go figure.
Not all body shops are good mechanics and not many mechanics are good body people... very few have the staffing to have great mechanics and great metal workers and paint people all under one roof... and these cars get taken apart and put back together during the build so many times it's a wonder any of them ever run at all.
Add to this - now we also expect the builders to be a suspension specialists for our PT builds... Oh yeah - and we got the front end from someone and the rear end from somebody else - and then we changed our plan 6 times.
In other words -- welcome to hot rodding.
|