[fakesnake.com]

display v- 13.0302
ecu v- 13.0302141

No auto level sensors

i didn't calibrate as i thought that was for auto level sensors

learned how to set ride height after speaking to ridetech yesterday. Have the proper air setting i want around 90psi or so after measuring all 4 corners at fully inflated and fully deflated height (set in the middle of those two). Preset 2 was previously set at 115 at all 4 corners. i want to change it to around 90psi or so.

press and hold #2 after setting them around 90psi. it confirms that preset 2 was saved. Go back to #2 setting and it is still at 115.

Thought I would try to repgrogram, when i went to that setting it asked me to confirm, i pressed 1 button for yes but it doesn't acknowledge me pressing button 1. Same with pressing button 3 to confirm no. It just sits there waiting for me to answer yes or no even though i keep pressing all buttons. Won't let me exit either. As if it is frozen like on a computer screen when you can't exit.

I also tried to change the "level on start" from off to on. I changes to on but when i come back to it, it changed back to off.