Long overdue update...
The car has been sitting as it got pushed-back for other projects over the summer. Now that the Missus has her new, spectacular deck, the boys have their cars rolling, vacation is over, and my neighbors have all their crap done I can turn attention to this car again. But, the garage is getting an overhaul in the mean-time.
As for progress, I've got the rendering ordered, many parts have been gathered and there are many to go but it's progress. The CF nose I picked up from Anvil in Cali, the fenders from Bryan (carbuff) in Texas, a big thanks there! The nose, hood, and fenders recently went on to make sure I had all the hardware but mostly to motivate me. Here it is in its mismatched color glory...
The brake and fuel lines are being bent, I have the firewall modified to accept the C6 booster with DSE bracket, the DSE subframe connectors are going in soon, and the new rear quarters from Goodmark (the new ones with the sail panels) are here are well.
And there are things I've been making for the car, here is one I started today. The tail-lamps on these cars have always struck me as slightly undersized. I've got our LDI scanner mapping the contours and surfaces and I'll transfer those dimensions into solidworks for "customizing", we'll cut the parts and I'll have an LED board and some other unique features coming for it soon.
I'm still struggling with color, I've narrowed it down to 4, perhaps seeing the renderings will help!