[black2002ls]

Final update for the night, and probably the next few days. Got a mock up shot with the intake on the block. Also a poor photo of the FPR (fuel pressure regulator) The adjuster is on top, the connectors on both sides will go to the fuel rails, and the one on the bottom will be for the main fuel line. here is how the plumbing will go. The fuel rails will be plumbed with incoming fuel and return lines to the tank. The intake will be plumbed with a line to the FPR making it boost dependent, a line for a pressure guage, and a line going to the waste gates. I think I'm going to have to restock my plastic round and hex rod, picking up some different sizes that what I have on hand. Up next I will begin the work on the brake calipers for the front brakes....should be fun.