Quote:
Originally Posted by jlwdvm
Maybe I wasn't too clear...I have a Spertech stand alone harness that came with my Texas Speed LS3 already. I started laying it out and hooking it up to the motor. It is long enough to get it through the heater blower motor hole so it can be mounted under the dash. It also has extra long coil pack leads to relocate them. I'm wondering what to do with the stock wiring that comes off the original firewall bulk head. Wondering what gets removed/cut, and what stays and how to handle this. I will probably be replacing all of the wiring in the car front to back as well. Thanks!
|
I usually replace the stock wiring with an AAW Classic Update kit. There are some wires that are not used but the updated fuse block etc are well worth it.
Don