View Single Post
  #117  
Old 11-13-2014, 09:53 PM
rat_rod_russell's Avatar
rat_rod_russell rat_rod_russell is offline
Senior Member
 
Join Date: Sep 2008
Location: Luling TX @ Nerd Rods
Posts: 365
Thanks: 44
Thanked 18 Times in 9 Posts
Default

Ah man, it was so cold today that no one came into the shop all day, It was AWESOME!!!

And thanks to the quite I manged to get the gas tank about 90% worked out. I'll need to build one real quick and make sure the lower gas filler hole will let the tank fill without backing up. It should work with the vent at the top to bleed off the air but I want to make sure. The tank is only 18.5 Gallons but it under the bed and it will use the stock filler neck. I've never liked the rear bed mounting solutions with the filler in the bed but I'm also 6'2" and more room in the CAB is a must for me. For more fuel I'll just add extra tank in the bed and just let it over flow down into the bottom tank and move the filler up higher.




Later
-Russell
__________________
PT-57
1957 Chevy Truck, 6.0L LS, T56, STS Twin Turbos, C6 Corvette Suspension, CAD Designed Frame by Hot Rod Jim's.
https://lateral-g.net/forums/showthread.php4?t=20292

http://www.nerdrods.com
Reply With Quote