Thanks guys, appreciate the comments (except yours, savage, I mean, come on, can't you come up with a new name. You've had savage johnson since we were in 9th grade) Anyway, I'm sure you've all figured out that the brakes are C6 ZO6. If you do the math, even with the ats spindles, these things are very reasonable. I'll let you all know what it takes to mount the rears. We're in the middle of making mounts to use the factory ZO6 parking brake. Once there built we can produce the mounts for anyone that wants to run these breaks. I think I'll have around $3500 including the spindles in the whole setup! I know this is only my opinion, but I think these things are way cooler looking and probably better performing than most aftermarket setups out there for the same or probably less money. As far as the wheels go, I'm going with Boze alloys (ZE forged) "mesh" 3 piece, with black center. I know a lot of people are starting to think the black centers are starting to be played out, but I still think they will look the best.
|