View Single Post
  #197  
Old 11-26-2014, 08:22 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,279
Thanks: 6,877
Thanked 2,115 Times in 970 Posts
Default

Quote:
Originally Posted by Rod P View Post
I see that it was suggested Two classes, "early models" and "late models",,I think it should be 2 classes also but those should be a Electronics and Standards class

Electronics Class- to included ANY car with any Traction controls, ABS or Electronic Differentials

Standards Class- to included ANY car without Electronic Driver aids


that keeps the field even.....its simple if you want to add ABS or traction controls to your early 60's or 70's car...then you race against cars with the same drivers aids such as Corvettes, 5th Gen Camaros, all wheel drives and so on....and early Iron cars can have a more even group
The only problem with that is an older 60's muscle car with ABS for example cannot compete equally with a late model Vette with equal power and driving skills. The later model car has a huge advantage in aero, center of gravity, and track width. Having ABS does not make them equal.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote