View Single Post
  #127  
Old 12-02-2014, 02:56 PM
Stovebolter's Avatar
Stovebolter Stovebolter is offline
Senior Member
 
Join Date: Mar 2008
Location: Harrison, AR
Posts: 301
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Payton King View Post
With it above center line you have raised the roll center and loosened the rear. The lower you go the more bite you will have in the rear. Try an inch or 2 below axle centerline. Is your watts fixed or adjustable? I assume your rear trailing arms are level at ride height
Yes, trailing arms are adjustable at rear mount....but level at ride height at this time. I may be wrong on the front mounting point. I remember you gave me roughly what yours was set at, and I added 2"s of adjustment in 1" increments both ways and took in consideration the axle centerline. I bet it's below. That would make better sense. I'll check it when I can get to the shop.

And Watts Link has a lot of adjustment.

Thanks.
__________________
468 BBC, TH400, Moser 9" floater, True Forged Competitions 18x9.5 18x12, Kore 3 C6 ZO6 calipers 14" & 13" rotors, Ride Tech True Turn, Ride Tech Air TQ's, Torque Arm with Watts link, Moser CT Full Floater 9" with locker.

Last edited by Stovebolter; 12-02-2014 at 05:03 PM.
Reply With Quote