Quote:
Originally Posted by 71RS/SS396
The return line you can make with normal AN fittings, the high pressure side needs to be made with crimp fittings or the DSE line kit capable of with standing over 1,000 psi. When I was using a stock pump/reservoir I cut the plastic elbow off of the tank and drilled and tapped it for 1/4" npt so I could screw a 1/4 to -6 fitting into it and then made my own AN return line from the cooler to the tank.
|
Are you saying the the stock tank will hold 1/4" npt fitting?
I have found installing the hoses and fitting extremely difficult in r&p end. Something what DSE did not think to end.