[ataves1]

Just installed a 4 point roll bar from Wild Rides Racecars. The tubes come fish mouthed which is a nice feature. It wasn't built to comply with any particular sanctioning body, just pro touring. This was definitely something I wish I would have done before the car was painted and assembled.

First step after gutting the inside was to locate the main hoop on the rocker boxes. I then drilled 2" holes so I could drop the hoop in and mark the height and angle of the down tubes.

Next I made the 6"x6" plates conform to the rocker boxes. I scored them with a grinder, then bent and welded them up.