Quote:
Originally Posted by i c e b l u e
Track Junky
I used the rust-oleum garage floor epoxy you can get at home depot/menards/etc. There is a 2.5 car garage kit for 100$ and I had to use 2 kits total for my garage. Overall it was very simple to use, and came with everything you needed to prep and paint the floor minus a roller and pan. The only downside is its much thinner than the industrial epoxy flooring I am used to at work, but that was nearly 10x the cost, so for my amateur garage purposes its more than good.
http://www.menards.com/main/doors-wi...798-c-8022.htm
Note, I chose to leave the vinyl chips out, so when I drop a bolt I can find it. They do this at the engine development facility I work at, and it gives a very clean/surgery room feeling |
Thanks. I picked up the same 2 boxes also, Garage door install scheduled for this Tuesday. Thanks for the insight.
Agreed, leaving the chips out. My vision isn't getting any better.