I could be overbuilding it, I have a habit of doing that. However, I always like to err on the side over too strong vs finding out halfway through a build that I have flex somewhere! With the bolt on girders, I could remove them to gain access if needed, or if I find out that I have plenty of strength. I'm building this primarily for my C10 which will probably come in close to 4000 lbs.
I have scoured the internet reading different thread and have seen so many different ways of building them. This design was based off of one that I found that made sense to me. I figured I'd start up a thread so I could get some feedback on my design.
Seems like there is more than 1 way to skin a cat... who knew?
|