[Sonar Chief]

Originally Posted by grendel

Do none of that:

Offset rack and pinion bushings:

http://www.summitracing.com/search/p...et-bushing/yes

Originally Posted by coolwelder62

Michael,how about I send my new design for free on Monday. I can send you the alum. parts and you can just cut off the bent bracket drill 2 holes and your done.

Scott .... just have to get longer bolts for the Al standoffs?

Thanks again for willing to solve problems, I do appreciate it!

Originally Posted by grendel

Or way and above and beyond the call of duty: Scott does it again. SCOTT DOES PROVIDE SERVICE AFTER THE SALE!

Edit: with the offset bushings I linked, it will move the rack input away from the gusset.

Jay .... I see what you're stepping in, use the offset bushing to the pass side instead of its intended use for lowered vehicle ( put em @ 9 o'clock instead of 6 o'clock).

I'll try the offset bushings and mod the front if I have too!

Thanks for helping guys!!!