Quote:
Originally Posted by Dlabarthe
Wow it all looks amazing. Hope to get some assistance. I'm newer to the site and am starting a build after tearing down a decent driver. Cars a 66 chevelle and as I'm working on the chassis I curious what suggestions are out there for a crossmember. I am putting a T56 behind and LS2 and am doing some custom cross bracing along with frame boxing. I could adapt to accommodate some different products and just wondering if you have any advice or suggestions short of building one.
Thanks
Daryl
|
You can modify the stock crossmember. The last T-56 we did we cut the mount pad off and turned the crossmember around then welded it back up.
Speedtech and HPI customs makes a nice retrofit cross member and bracing.
http://www.speedtechperformance.com/...rod/prd398.htm
links to the left.