Finally got a drivetrain for mock up purposes, this past weekend I got everything sat in place. This week I need to get some gas for my welder, some tubing, and I will start making motor mounts and trans mounts. I also set the car at ride height so I could mock up the 18x9(265/350 and 18x11(335/30) setup off my 98 cobra to get an idea on tire size and width wheels to run. I'm pretty set on 18x12.5(335/30) and 18x11(285/35) setup. Playing with the idea of cutting 2 to 2 1/2 inches out of height out the quarters and front fenders to get the body lower to the ground. Looks really high to me... but atleast the project is moving forward again!
|