Thread: This is MY 67 Camaro
View Single Post
  #839  
Old 01-06-2015, 06:43 PM
coolwelder62's Avatar
coolwelder62 coolwelder62 is offline
Senior Member
  
Join Date: Aug 2005
Location: Vinland Ks.
Posts: 4,315
Thanks: 0
Thanked 3 Times in 3 Posts
Default
Michael,The casting bump on the kuckle needs to be milled or ground down so lower steering arm bolt hole is the same thickness as the upper bolt hole.You can drill the lower hole with a 1/2" drill bit. Use a 12mm or 1/2" bolt & nylock nut.
Reply With Quote