Quote:
Originally Posted by WSSix
Ernie, you're building a street car like I am. I have Kore3's front C5/6 brake kit on stock spindles with their billet hubs and 1/2 studs. I have no doubt this setup will be plenty for my needs. I have no doubt it will be plenty for your needs as well. Keep it simple.
|
Agreed, we beat the hell out of many stock spindles with zero issues or failures. Can't say the same for the CPP stuff.
In my opinion a simple Kore 3 caliper bracket is cheaper than the C5 hub you will need.
David has some great advice on the ball joints but for a street car might not be necassary.