Item Location (City/State): Milford MI
Price: Cheap to Expensive
Description:
Photos are from when parts were new...
Not sure what the used market is like for old Pro-Touring parts. All the parts were working well when removed. I'm just tring to clear out some space, pass some good parts to Lat-G member and get some money to buy more parts.
Art Morrison Front Clip
SKF wheel bearings
C-6 Corvette upper and lower control arms
Splined Sway Bar
Set up for OE style LS Corvette engine mounts
With rack with higher effort T-bar
Strange Shocks
Built in trans cross member
No brakes
$3200
Kooks 304 stainless 1/78” headers with SPD CNCed exhaust flanges to 3 inch V-band clamp. Fits Art Morrison or DSE front sub frame. Nice all tig welded headers. Not off the shelf Kooks custom welded to be tight to floor pan.
$ 600
L92 Truck exhaust gaskets.
Detroit Speed Dash inset with Stewart Warner Gauges
$500
D&D T-56 Transmission Viper box with the following gear ratios.
2.66/1.78/1.30/1.00/.80/.62
26T Input Shaft set up for LS
31T Output Shaft Viper
Bronze Shift Forks
Includes B&M Viper Shifter
13000 miles
$ 2200
D&D T-56 Transmission F-car box with the following gear ratios.
2.66/1.78/1.30/1.00/.80/.62
26T Input Shaft set up for LS
31T Output Shaft Viper
Bronze Shift Forks
OE Shifter
NEW NEVER USED
$2700
Set of Brembo brakes off Red Devil – Red
6 piston front 380 mm 4 piston rear 360 mm
2 sets of front rotors one for street and one for track
2 set pads one for street and one for track (All ½ worn)
Fits Art Morrison sub frame, DSE and C-6 Corvette
$4000
Pair like new Recaro hard shell race seat Large just used OUSCI 2012 in Mayhem
$1000
See photo below
I know I'm going to get a bunch of questions so e-mail me at (
[email protected]) or post it here for a general question. I can ship some things but the big stuff will be a pain and UPS has upped its rates a bunch. This weekend I'll try to get some more photos.
Thanks
Mark