It was so nice outside today I opened up the garage door and had too find something to do.
I used to have two 1/2 npt tapped holes with -10 fitting threaded into the front plate. That meant I had to RTV the plate to the belt drive. Last time I put it back together it leaked. The belt drive has -10 o-ring threads in it, but because of the front plate, I can't use a normal fitting. So, I made my own. I cut bigger holes in the front plate to pass the new fittings through.
That is the last custom machined part. If it's not too expensive, I'm going to gather up all the machined parts and have them hard anodized black.