Quote:
Originally Posted by Josh@Ridetech
Hey Paul,
Your shock mounts in that lower control arm should be 1.25", the only thing that I can think of that may be causing your problem is some excess powdercoating making it a tight fit (I see this every now and then, which surprises me that yours are chipping). With them being jig welded, the measurements stay very consistent. What is inner dimension that you have between the runners on the lower shock mount?
On the spring retainer, you'll want to make sure that it's not going to hit the tower. You may have to do some trimming in the pocket to be sure that it won't touch throughout the travel.
You're welcome to post some pictures and I'll be happy to help!
Thanks,
Josh |
Josh as always you are the man, I feel bad I always email you with questions so I figured I would just post I will measure and also take some pictures tonight when I get home from work, the driver side took a little effort but it did go in, the passenger side is just being stubborn. it is really like you said just a hair too thick and as soon as it gets close the eyelet swivels and it will not cooperate.
Thank you